Assemble The Pump - Xylem FLYFT P7900 Installation, Operation And Maintenance Manual

6 Maintenance
3. Install the threaded adapter.
4. Install the hydraulic pump into the cross piece.
5. Install the puller screw into the hydraulic pump.
6. By using the hydraulic pump, apply pressure until the propeller hub is released.
7. Remove the hydraulic pump and the cross piece.
8. Remove the propeller hub and the O-ring.

6.8.3 Assemble the pump

6.8.3.1 Install the propeller hub
Table 16: Tools
Tool
Hydraulic pump
14-57 21 04
Basic repair kit
436 19 00
Hub tool 436 18 00
60
Illustration
1. Threaded adapter
2. Non-threaded adapter
1. Screw unit 432 50 00
2. Washer 432 43 00
3. Puller screw unit 432 51 00
1
1. Cross piece 432 44 00
2. Screw 432 53 00, M16
3. Screw 432 55 00, M12
4. Washer 432 45 00
P7900 Installation, Operation, and Maintenance Manual
1 2
1
2
3
2
3
4