NETGEAR ProSafe FVS114 Reference Manual page 67

Select IP Subnet in the ID Type menu.
d.
In this example, type 192.168.3.1 in the Subnet field as the network address of the
FVS114.
Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the FVS114.
e.
Select All in the Protocol menu to allow all traffic through the VPN tunnel.
f.
Select the Connect using Secure Gateway Tunnel check box.
g.
Select IP Address in the ID Type menu below the check box.
h.
Enter the public WAN IP Address of the FVS114 in the field directly below the ID Type
i.
menu. In this example,
The resulting Connection Settings are shown in
Configure the Security Policy in the NETGEAR ProSafe VPN Client software.
3.
In the Network Security Policy list, expand the new connection by double clicking its
a.
name or clicking on the "+" symbol. My Identity and Security Policy subheadings appear
below the connection name.
Click on the Security Policy subheading to show the Security Policy menu.
b.
Figure 5-11: Security Policy Editor Security Policy
Select the Main Mode in the Select Phase 1 Negotiation Mode check box.
c.
Configure the VPN Client Identity.
4.
Basic Virtual Private Networking
Reference Manual for the ProSafe VPN Firewall FVS114
would be used.
22.23.24.25
202-10098-01, April 2005
Figure 5-10.
5-11