NETGEAR ProSafe FVS114 Reference Manual page 108

Reference Manual for the ProSafe VPN Firewall FVS114
4. Set up the FVS114 VPN -Auto Policy illustrated below.
From the main menu VPN section, click on the VPN Policies link, and then click on the
a.
Add Auto Policy button.
Figure 6-10: Scenario 1 VPN - Auto Policy
Configure the IKE Policy according to the settings in the illustration above and click
b.
Apply to save your settings. For more information on IKE Policy topics, please see
Policies' Automatic Key and Authentication Management" on page
After applying these changes, all traffic from the range of LAN IP addresses specified on
5.
FVS114 A and FVS114 B will flow over a secure VPN tunnel.
6-20
202-10098-01, April 2005
WAN IP
address
LAN IP
addresses
6-3.
Advanced Virtual Private Networking
"IKE