Configuration File Management - NETGEAR ProSafe FVS114 Reference Manual

Reference Manual for the ProSafe VPN Firewall FVS114
Figure 7-5: Router Upgrade menu
To upload new firmware:
Download and unzip the new software file from NETGEAR.
1.
In the Router Upgrade menu, click the Browse button and browse to the location of the binary
2.
(.BIN) upgrade file
Click Upload.
3.
Note: When uploading software to the FVS114 VPN Firewall, it is important not to interrupt
the Web browser by closing the window, clicking a link, or loading a new page. If the browser
is interrupted, it may corrupt the software. When the upload is complete, your firewall will
automatically restart. The upgrade process will typically take about one minute.
In some cases, you may need to reconfigure the firewall after upgrading.

Configuration File Management

The configuration settings of the FVS114 VPN Firewall are stored within the firewall in a
configuration file. This file can be saved (backed up) to a user's PC, retrieved (restored) from the
user's PC, or cleared to factory default settings.
From the main menu of the browser interface, under the Maintenance heading, select the Settings
Backup heading to bring up the menu shown below.
7-6
202-10098-01, April 2005
Maintenance