Table 6-1.
VPN – Auto Policy Configuration Fields
Field
Authentication Algorithm
NETBIOS Enable
VPN Policy Configuration for Manual Key Exchange
With Manual Key Management, you will not use an IKE policy. You must manually type in all the
required key information. Click the VPN Policies link from the VPN section of the main menu to
display the menu shown below.
Advanced Virtual Private Networking
Reference Manual for the ProSafe VPN Firewall FVS114
Description
If you enable AH, then use this menu to select which authentication
algorithm will be employed.
The choices are:
• MD5 — the default
• SHA1 — more secure
Check this if you wish NETBIOS traffic to be forwarded over the VPN
tunnel. The NETBIOS protocol is used by Microsoft Networking for such
features as Network Neighborhood.
202-10098-01, April 2005
6-9