Table of Contents
Advertisement
Screen
6.
When you complete, exit, or fail calibration, shut
off then start the machine to clear the screen.
Figure 73
Action
Hold the left motion-control
lever in the full R
EVERSE
position and press the
button.
Hold the left motion-control
lever in the N
position
EUTRAL
and press the
button.
Hold the right motion-control
lever in the full F
ORWARD
position and press the
button.
Hold the right motion-control
lever in the full R
EVERSE
position and press the
button.
Hold the right motion-control
lever in the N
position
EUTRAL
and press the
button.
Press the
button.
g377652
Adjusting the Tracking
If you push both motion-control levers forward the
same distance and the machine pulls to 1 side, adjust
the tracking as follows.
Note:
The InfoCenter displays only 2 items at a time;
however, the following figures show the full menus
for context.
1.
Park the machine on a level surface, disengage
the PTO, and move the motion-control levers
outward to the P
2.
In the M
AIN MENU
press the
3.
In the S
ERVICE
and press the
4.
Adjust the tracking to the left or right.
Note:
Adjusting the tracking to the left causes
the machine to steer toward the left; adjusting
the tracking to the right causes the machine to
steer toward the right.
5.
Press the
button.
45
position.
ARK
, scroll down to S
ERVICE
button.
Figure 74
menu, scroll down to T
button.
Figure 75
Figure 76
and
g376300
RACKING
g426844
g377650
Advertisement
Table of Contents
