Toro Revolution Series Operator's Manual page 16

InfoCenter Menus
To access the main menu, press the
any of the main information screens.
Refer to the following tables for a description of the
options available from the menus:
Note:
Protected under Protected
Menus—accessible only by entering PIN.
Main Menu
Menu Item Description
The F
the recent machine faults. Refer to
F the Service Manual or your Authorized
AULTS
Service Dealer for more information
on the F
The Service menu contains
information on the machine such
S
ERVICE
as hours of use and counts, power,
lever calibration, and tracking.
The D
states and data that the machine
D currently has. You can use this
IAGNOSTICS
information to troubleshoot certain
issues.
The S
S customize and modify configuration
ETTINGS
variables on the InfoCenter display.
The A
number, serial number, and software
A
BOUT
version (if PIN is entered) of your
machine.
Faults
Menu Item Description
Lists the total number of key-on hours
C (i.e., hours that the key has been in
URRENT
the O
Indicates the last key-on hour that the
L
AST
fault occurred on.
Indicates the first key-on hour that the
F
IRST
fault occurred on.
Indicates the number of fault
O
CCURRENCES
occurrences.
button from
menu contains a list of
AULTS
menu.
AULTS
menu lists various
IAGNOSTICS
menu allows you to
ETTINGS
menu lists the model
BOUT
position).
N
Service
Menu Item
H
OURS
C
OUNTS
M S R
AX PEED ANGE
L M
IMP ODE
L C
EVER ALIBRATION
T
RACKING
Diagnostics Menu
Menu Item
B S
ATTERY TACK
B P
ATTERY ACKS
CU M
OTORS
TU M
OTORS
16
Description
Lists the total number of hours various
components have been used:
•
Key switch
•
Machine
•
Traction contactor
•
Cutter contactor
•
Neutral
•
Total mow time
•
Left traction
•
Right traction
•
Limp mode
•
Transport time
Lists the counts of various
components:
•
Start cycles
•
Traction contactor
•
Cutter contactor
•
Cutter PTO
Limits the maximum traction speed
of the machine; refer to Adjusting the
Maximum Speed Range (page
Displays and adjusts the battery
percentage before limp mode starts.
Refer to Adjusting the Battery
Percentage for Limp Mode (page
Calibrates the motion-control levers.
Refer to Calibrating the Levers (page
44).
Adjusts the tracking of the
motion-control levers. Refer to
Adjusting the Tracking (page
Description
Indicates the status of the batteries.
Indicates the status of individual
batteries.
Indicates the status of each cutting
unit motor.
Indicates the status of each traction
unit motor.
42).
30).
45).