Pre-Maintenance Procedures; Removing The Rear Cover; Lubrication; Lubricating The Mower Deck-Lift Pivots - Toro Revolution Series Operator's Manual

Pre-Maintenance
Procedures

Removing the Rear Cover

1. Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2. Shut off the machine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Turn the battery-disconnect switch to the O
position.
4. Remove the 8 screws securing the rear cover.
5. Remove the cover.
Figure 55

Lubrication

Lubricating the Mower
Deck-Lift Pivots
Service Interval: Every 100 hours
Use light oil or spray lubricant to lubricate the deck-lift
ARK
pivots.
FF
g401469
38
Figure 56
g336930