Order Code - Presys DMY-2015 Technical Manual

Presys  Instruments
It accepts 90 to 240VAC or 130 to 340VDC (with any polarity) power supply.
The equipment has an extruded aluminum case which avoids electrical noise,
electromagnetic interference, radiofrequency interference, etc. and its robust
construction makes it tough enough for the most hostile environment.
The front panel has a high visibility display configurable up to 4 digits which
can show the process variable of each channel or a set of selected channels in the
scan mode. During configuration, the display shows mnemonics and parameter
values. The Indicator also presents another two-digit display for identification of the
channel viewed. The leds can be used as a visual indication of alarm for each
channel. The alarm outputs can be configured, independently, to operate with
retention, demanding the operator acknowledge by means of the front panel keys in
order to deactivate them after the process variable returns to normal condition.

1.2 - Order Code

Field A
0
1
2
3
4
5
6
7
8
9
Field B
0
1
2
Field C
Same code of output 1
Field D
1
2
3
Introduction
Página 2
DMY - 2015 - ___ - ___ - ___ - ___ - ___ - ___
A
Inputs
12 thermocouple inputs
8 RTD inputs
6 thermocouple and 4 RTD inputs
12 current (mA) inputs
12 voltage (V) inputs
6 thermocouple and 6 current (mA) inputs
6 thermocouple and 6 voltage (V) inputs
6 current (mA) and 6 voltage (V) inputs
6 current (mA) and 4 RTD inputs
6 voltage (V) and 4 RTD inputs
Output 1
Not used
SPDT relay
Open collector voltage
Output 2
Power Supply
90 to 240VCA or 130 to 340VDC (any polarity)
24VDC
12VDC
B C D E
DMY - 2015
F