Presys DMY-2015 Technical Manual page 24

Presys  Instruments
Level 1 - General
Level 1 presents the options: TAG, SOFT, PASS and INDC (see figure 11).
TAG - consists in an alphanumeric identification for the instrument. The
procedure to enter the tag or any other parameter is the same as described
previously for the password (refer to value password for the functions of the ENTER,
UP and DOWN keys).
SOFT - shows software version.
PASS - allows the user to enable or disable the password system for
accessing the configuration mode. The password system may be chosen as a key
sequence, a value (number chosen by the user and number 2015) or both. The
correct key sequence is obtained by pressing the UP, DOWN and ENTER keys in
this order.
INDC - is an option for the visualization of the measured variables and
totalizations on the display. It allows the user to view the values of different channels
only by pressing the UP and DOWN keys, or it sets the instrument to change
automatically the indication and totalization of different measured variables among
some selected channels. In order to enable the automatic scan mode, choose the
YES option for INDC and provide the exhibition times (given in seconds) for viewing
each channel (channel 1 is the only one whose time cannot be zero). The exhibition
time configured for a channel refers to the indication of the measured variable and to
its totalization (when enabled).
Fig. 11 - GENERAL level options
DMY - 2015
Operation
Página 21