Connection For Indicators With Different Input Types - Presys DMY-2015 Technical Manual

Presys  Instruments
Figure 7 below shows the connections of voltage sources.

2.3.5 - Connection for Indicators with different input types

The available models for DMY-2015 Indicator with different types of input are
listed below together with the corresponding terminals and channels for each input.
The connections of the sources or temperature sensors are made according to the
instructions described on sections 2.3.1 to 2.3.4.
Indicator Input
Type
TC / RTD TC
RTD
TC / mA TC
mA
TC / V TC
mA
Table 6 - Terminals for Indicators with different input types
Installation
Página 12
Fig. 7 - Voltage source connection
1 and 2 (CH1), 3 and 4 (CH2), 5 and 6 (CH3),
7 and 8 (CH4), 9 and10 (CH5), 11 and 12 (CH6)
13 to 15 (CH7), 16 to 18 (CH8),
19 to 21 (CH9), 22 to 24 (CH10)
1 and 2 (CH1), 3 and 4 (CH2), 5 and 6 (CH3),
7 and 8 (CH4), 9 and10 (CH5), 11 and 12 (CH6)
13 and 14 (CH7), 15 and 16 (CH8), 17 and 18 (CH9),
19 and 20 (CH10), 21 and 22 (CH11), 23 and 24 (CH12)
1 and 2 (CH1), 3 and 4 (CH2), 5 and 6 (CH3),
7 and 8 (CH4), 9 and 10 (CH5), 11 and 12 (CH6)
13 and 14 (CH7), 15 and 16 (CH8), 17 and 18 (CH9),
19 and 20 (CH10), 21 and 22 (CH11), 23 and 24 (CH12)
Terminals
DMY - 2015