Preparation; Requirements - Siemens SIMATIC 317TF-2 DP Getting Started

Preparation

2.1

Requirements

Requirements
The following requirements must be fulfilled:
● You have an S7-300 station, consisting of:
● For operating the safety functions, you need:
CPU 317TF-2 DP: Controlling a SINAMICS S120 with Safety Functions
Getting Started, 07/2010, A5E02982990-01
– Power supply (PS), e.g. 6ES7307-1KA00-0AA0
– CPU 317TF-2 DP with memory card (4 MB or more), 6ES7317-6TF14-0AB0
V2.7/V4.1.5.
– Digital input module, safety-related (F-DI) with bus connector, for example,
6ES7326-1BK02-0AB0
– Digital output module, safety-related (F-DO) with bus connector, for example,
6ES7326-2BF10-0AB0
– Safety protector, 6ES7195-7KF00-0XA0
– Digital input module (DI) with bus connector, for example, 6ES7321-1BH02-0AA0
– Digital output module (DO) with bus connector, for example, 6ES7322-1BH01-0AA0
– Two optional front connectors for the digital modules
– Emergency stop, 2-channel - see the Configurator for pushbuttons and SIRIUS
3SB3/3SF5 indicator lamp in the Internet (https://mall.automation.siemens.com)
– Key switch, 2-channel - see the Configurator for pushbuttons and SIRIUS 3SB3/3SF5
indicator lamp in the Internet (https://mall.automation.siemens.com)
– 2 hinge position switches, 2-channel to monitor the protected zone door - see the
Configurator for position switches in the Internet
(https://mall.automation.siemens.com)
2
7