Configuring The Hmi - Siemens SIMATIC S7-1200 Manual

4 Installation and Commissioning
No. Object
12. I/Ofield_SetValue_x
13. SymbolicI/Ofield_Unit_x
14. SymbolicI/Ofield_ParamSet_x
15. I/Ofield_Power_x
16. I/Ofield_SensorValue1_x
17. I/Ofield_SensorValue2_x
18. Button_SetReadFan_x
4.4.2

Configuring the HMI

If the KTP900 Basic is used as an operator panel, the project-specific IP address
(see Figure
Table 4-9
No.

1.
Connect the KTP900 Basic to the
power supply voltage.

Access the settings by clicking the
"Settings" button in the "Start
Center".

2.
Next open the settings of the
network interface by clicking the
"Network interface" button.
Controlling several fans (ebm-papst) via Modbus RTU
Entry ID: 109476801, V2.0,
Properties > General > Process > Tag:
Register_fan{x}_input{53274}_real
Properties > General > Process > Tag:
Register_fan{x}_input{53274}_calc
Properties > General > Process > Tag:
Register_fan{x}_input{53277}_uint
Properties > General > Process > Tag:
Register_fan{x}_input{53281}_real
Properties > General > Process > Tag:
Register_fan{x}_input{53283}_real
Properties > General > Process > Tag:
Register_fan{x}_input{53284}_real
Event: Set tag "Tags_EbmPapst_HMI_readFan" = x
4-1) must be set.
Action
09/2018
Reference
Remarks
34