Advertisement
Napoli Installation Guide - Surface Profiles
Using the suction glass lifters, replace the In Line panel into the silicone lined channels, as
11
marked on the underframe. Make sure that the gap for the door is correct and that the clear
plastic Underframe Insert fits snugly between the In Line panel and the wall over the full
height of the door aperture.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
To prevent leakage around the Glass to Wall brackets, fill the glass slots with silicone
12
before fitting the face plates.
Loosely fix the face plates through the slots in the glass, ensuring that the clear
gaskets are inserted on both sides of the panel. Fully tighten the wall screws.
Recheck that the Return panel is plumb vertical and in the correct position in the
underframe, then fully tighten the Glass to Wall bracket face plates.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
8
Advertisement
