Advertisement
Napoli Installation Guide - Surface Profiles
Place the 10 mm Spacer into the Underframe channel and use it to align the vertical wall
3
profiles at each end of the Underframe.
Push the wall profiles down as far as they will go and use a 2 metre spirit level to ensure that
they are plumb vertical. Mark the screw fixing holes on the wall and remove the vertical profiles.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
Drill 4.5 mm holes where marked and insert wall plugs. Reposition the vertical
4
profiles and insert the top and bottom screws to hold them temporarily in place.
Remove the 10 mm Spacer. Insert rubber strip into the underframe as shown to
cushion the glass.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
4
Advertisement
