Download Print this page

Majestic Napoli Installation Manual page 10

Surface profiles

Advertisement

Napoli Installation Guide - Surface Profiles
NOTE: Steps 15-16 require one person to support the door at all times whilst another
15
15
person must be inside the enclosure with face plates, gaskets and screws.
Insert two short pieces of self adhesive rubber strip in each door hinge slot as shown.
Position the door mounting blocks in the underframe channel as shown and lift the door on
to the blocks.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
DOOR
Rubber
strips
16
16
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
IN LINE PANEL
Rubber
packing
strips
Hinge with both
face plates removed
for illustration
purposes only.
Position the hinges centrally in their slots and with gaskets inserted on both sides
of the glass, loosely screw the hinges and face plates together through the glass.
Make any fine adjustment to the alignment of the door and then fully tighten the
hinges to 10-12 Nm torque and remove the mounting blocks.
Telephone +44 (0) 8448 001 500
10
DOOR
Rubber
packing
strips
5mm gap
between glass

Advertisement

loading