Advertisement
Napoli Installation Guide - Surface Profiles
If the vertical wall profiles are too long, cut them to length and file the cut ends smooth.
9
Run a bead of silicone along the wall side of the vertical profiles, as shown. Screw them in
place.
Apply a generous amount of silicone on the inside of the channels where they meet in
the corners to prevent water penetration.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
Ensure that the rubber strip is in place in the underframe channel in the position
10
to be occupied by the In Line panels. Trim it at the ends of the panel positions so
that it does not extend into the door position.
Loosely screw the 4 Glass to Wall brackets to the wall.
Run continuous beads of silicone along the inside of the vertical wall profiles and
the In Line panel positions in the Underframe channel, as shown. Do not place
silicone in the central door area of the Underframe.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
7
Advertisement
