Advertisement
Napoli Installation Guide - Surface Profiles
Cut the Horizontal seal to the width of the Door and fit it to the bottom edge of the Door with
19
the deflector blade facing inwards as shown.
Trim the ends of the deflector blade back so that they clear the vertical Glass to Glass seals
which should run down to the top of the Underframe.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
Horizontal seal
notched at each
end to clear
vertical seal
Vertical seal extends
down to underframe
INWARD
OUTWARD
OPENING
OPENING
DOOR
DOOR
Push the underframe insert into the underframe channel under the door noting
20
the difference in orientation for outward and inward opening doors.
The vertical blade of the insert should be notched at each end as shown to allow
any water to drain back from the underframe to the inside of the shower
enclosure.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
12
5-6mm
Notch
Advertisement
