Download Print this page

Majestic Napoli Installation Manual page 3

Surface profiles

Advertisement

Napoli Installation Guide - Surface Profiles
Measure the width of the alcove that the enclosure is to be fitted in to and check that the
1
1
enclosure will fit into the aperture within its adjustment tolerances, allowing for any lean of
the wall on the panel side.
Mark where the underframe will sit on the floor or, if installing to a tray, position the Under-
frame 10 mm from the front edge of the tray. Cut the Underframe to fit.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
Run a bead of silicone along the underside of the Underframe as shown and apply
2
silicone into the corners where the underframe will sit to ensure a seal between
the Underframe and the walls
Position the Underframe on the floor where marked and tape it in place while the
silicone sets.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
3

Advertisement

loading