Advertisement
Napoli Installation Guide - Surface Profiles
Run a small bead of silicone along the outside edge of the underframe where it
23
meets the tray or floor and on the vertical edges where it meets the walls.
Similarly, run a bead of silicone into the corners where the wall profiles meet the
wall, both on the inside and the outside of the enclosure.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
Bias
adjustment
screws
Adjust the bias on the hinges using the 2 small grub screws on the inside and
24
outside of the hinge. For an outward opening door, the two grub screws on the
outside of each hinge should be undone until their heads are flush with the hinge.
The grub screws on the inside of the hinge can then be tightened, pulling the door
in to the seal.
Reverse this process for inward opening doors.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
14
Advertisement
