Majestic Como vJUN19 Installation Manual

Como Corner Installation Guide - vJUN19 1
Thank you for purchasing this Como shower enclosure. Please study these instructions
carefully before assembly and installation.
Checking of Parts
Parts are listed at the beginning of this guide. Please check all supplied parts immediately
upon receipt and contact the Majestic Shower Company in the event of any missing or
damaged parts.
Handling of Parts
When handling glass, take care to ensure that corners or edges are not knocked. Do not
place glass on hard surfaces - place cushioning material underneath to prevent the glass
from shattering.
Unwrap all metal parts carefully to prevent damaging the plated surfaces.
Pre Installation Checks
Prior to undertaking installation, check the accuracy of the following against specifications
for the particular installation location:
- Verticality and flatness of the wall. A maximum of 15 mm lean in or lean out of the wall
relative to the floor or tray can be accommodated by the wall profiles.
- Levelness and flatness of the floor or rim of the shower tray.
DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS
The Majestic Shower Company Limited Telephone +44 (0) 8448 001 500
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com