Installation; Filling Of The Tank; Connection To The Electric Network; Coffee Pouring Spout - FlyTek STEEL PRO Operation And Maintenance Manual

Remove the machine from the packaging and place it on a stable and horizontal surface, suitable to support
its weight, near a suitable socket. Keep the packaging and all its parts for possible future transport.
Remove the steel cover (ref. G) to access the water tank. WE RECOMMEND THE USE OF A WATER
SOFTENER FILTER OR ANTI-SCALE BAG that must be periodically replaced. If this is not done, scale
deposits may form inside the machine, these can prejudice the correct operation of the machine, apart
from the validity of the warranty. Therefore, after having inserted the water softener filter inside the tank,
fill the latter with drinking water, possibly with low calcium content. The tank can be filled using a funnel
and a bottle.
To prevent the water reaching a too low level in the tank, we recommend visually checking the water level
looking through the slot located on the right side of the machine.
The coffee pouring spout is located in the front part of the machine.
Turn on the machine pressing the green luminous switch (ref. E) located on the right side of the same; the
incorporated light turns on. As soon as the machine is turned-on, the rapid heating process of the coffee
group starts.

FILLING OF THE TANK

CONNECTION TO THE ELECTRIC NETWORK

The power voltage of the machine is not modifiable by the user. Before
connecting it to the electric network, check that the voltage of the network
corresponds to the power supply voltage of the machine indicated on the
identification plate.
COFFEE POURING SPOUT (ref. b)
During pouring do not touch the spouts and do not approach your face to the
hot parts of the machine (burns hazard). The heating surfaces of the machine
are subject to residue heat even after use!

INSTALLATION

TURNING-ON

14