Operating The Unit; Refilling The Product Tanks - Silver King SKDC12-ESUS1 Technical Manual

Operating the Unit

To dispense a drink, perform the following procedure.
Step
1
2
3
4

Refilling the Product Tanks

To refill the product tanks while in the unit, perform the following procedure.
Step
1
2
3
4
5
6
Figure 5: Product Tanks Open
Place the drink under the appropriate dispensing tube.
Select the type of product required for the drink, (bottom row), then go to Step 3
or Step 4, depending on the type of drink required.
If no product is specified, Cream will be dispensed. This default can be changed
in the Manager menu
For coffee, press the proper drink size button (top row) to dispense the proper
amount of product.
For Latte, Cappuccino or Coolatta, press the appropriate button (middle row),
then press the proper size button (top row) to dispense the drink.
Open the front and top access door of the unit.
Open the lid of the product tank to be refilled.
Refill the tank with the appropriate product for that tank. NOTE: Do not
fill containers above fill line. (See Figure 5)
Close the tank lid.
Close the top access and front access doors of the unit.
The unit is now ready to resume normal operation.
Action
Action
9