Table of Contents
Advertisement
Drip Tray Cleaning and Daily Wipe Down
Step
1
2
3
4
5
6
7
8
Remove the drip tray by lifting it up and off of the two mounting screws.
Rinse the drip tray in lukewarm potable water.
Place the tray in hot water at a minimum water temperature of 140°F or 60°C. A
good quality general-purpose soap should be added to the hot water at the
concentrations recommended by the detergent supplier.
Wash the tray thoroughly using a bottlebrush to reach all corners and crevices. If
a dishwasher is available, this step may be carried out by placing the tray in the
dishwasher and washing on the pot cycle.
After washing, rinse the tray thoroughly with lukewarm potable water.
Turn the tray upside down and let it air dry.
While cleaning the drip tray, wipe down the front apron, the valve area and the
bottom of the door to make sure there are no product splashes sitting on these
surfaces.
Wipe down the area under the door and under the valve block, as shown in
Figure 6.
Figure 6. Area to be Cleaned
Action
12
Area of valves
Advertisement
Table of Contents
