Table of Contents
Advertisement
Observing the Current Temperature Inside the Unit
To see the current temperature inside the unit, press the up or down arrow until the Temperature is displayed.
Changing the Temperature Set Point
If Product temperature is not within spec (33 - 40 degrees) perform the following procedure to adjust cabinet
temperature accordingly. The unit follows a 1:1 ratio. For example, if product temp is 32 degrees (1 degree below
product temp spec) adjust the Temp Set Point UP by one degree.
Step
1
2
3
4
5
6
7
Changing Coolatta Base
The Coolatta drink base comes in two types, coffee and neutral. To set the unit for the type used, perform the following
procedure.
Step
1
2
3
4
5
6
7
Changing the Dispenser Language
Multiple languages will be available in the future for this unit. At that time a procedure will be added to allow the operator
to change the language on the unit.
On the indicator panel, press the up or down arrow until the Config Mode Entr Btn
Combo is displayed.
Press the X Size button (this is the button combo)
Press the Up or Down arrow until the term "Temp Set Point" is displayed.
Press the Select button.
Press the Up or Down arrow again to choose the desired temperature (between
35 and 40°).
Press the Select button.
Press the Home button to return to the main menu.
On the indicator panel, press the up or down arrow until the Config Mode Entr Btn
Combo is displayed.
Press the X Size button (this is the button combo).
Press the Up or Down arrow until the term "Base Selection" is displayed.
Press the Select button.
Press the Up or Down arrow again to choose either the Coffee or Neutral
selection.
Press the Select button.
Press the Home button to return to the main menu.
Action
Action
10
Advertisement
Table of Contents
