Print Bed Sheet Using; Cable Installation - XYZ Printing PartPro300 xT User Manual

3.4 Using Print Bed Sheet
A Print Bed Sheet sticks on the print bed. (cover the whole print bed surface)
Note:
• The user should replace the sheet, if surface worn out or damaged.
• Close each build plate clamps at the surrounding by hand in order to secure it.
• If the build plate clamp is open, it may interfere and damage the sensor. Please make sure to close these
clamps.

3.5 Cable Installation

① Use the enclosed cable to connect both printer and filament storage box.
② Connect the USB cable between USB socket and USB port of notebook.
③ Plug in the power cord and turn on the power to display the screen. The installation is done.
①
②
③
PartPro300 xT
13