XYZ Printing PartPro300 xT User Manual page 2

Disclaimer
Conservation of the Manual
This manual is furnished with the XYZprinting and may be used or copied only in accordance with the term of purchase.
!
The manual is an integral part of the machine and must always accompany the same, even in case of sale. It must
always be kept near the machine, in an easily accessible and known to staff. The operator and maintenance staff must
be able to quickly locate and consult at any time.
• Before performing any operations on the machine and / or packaging of the various parties should read this entire instruction
manual. This contains important information for the safety of persons engaged in routine maintenance, the persons involved in the
use and operation of the machine.
• This manual refers to the machine on which the model number is indicated on the title. XYZprinting reserves the right to make
technical changes on the machines and manuals without prior notice.
• No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, recording, or otherwise, without the prior written permission of XYZprinting. For this entire user guide, please contact
authorized reseller or XYZprinting customer service for providing.
• Requests for additional copies of this manual should be directed to customer service in the of XYZprinting.
Limitation of warranty and liability
The XYZprinting is responsible for the device in its original configuration. Any changes to the configuration or the operating cycle of the
machine must be performed or authorized by the XYZprinting technical department. XYZprinting is not responsible for the problems
dues to the use of not original spare parts.
Intended use
PartPro300xT is designed and built for fused deposition modeling (FDM) for various high quality plastics like PLA, ABS.
The PartPro300xT printer is the perfect machines for concept models, functional prototypes. Particularly, the printer has two print
heads plus attaching an external Filament storage box. This box can mount up to 2 filament spool (3Kg) at the same time and also
print dual color 3D object simultaneously.
Trademark
All trademarks and register trademarks are the property of their respective owners.
Copyright © 2019 XYZprinting, Inc. All Rights Reserved.
Introduction
PartPro300 xT
1