XYZ Printing PartPro300 xT User Manual page 11

Note :
1. The filament weight is 3kg, please use both hands to move it out.
2. Check the filament spool label specification and the filament scale status.
⑤ Printer is very heavy. Please assign two persons to move, before transporting to flat table.
TEAM LIFT
⑥ Remove the tape, cable tie, inner packaging, all protective mask on the glass.
⑦ Check that the printer sits on the table stably. If the printer shakes, adjust the leg knob height until the printer is balanced
(only front right leg has knob).
PartPro300 xT
10