Table of Contents
Advertisement
Chapter 3: FRU Removal and Replacement Procedures
Replacing Node Memory Modules
2. Slide the cooling fan into the securing slots until the tabs lock into place.
3. Close the Node cover (see
4. Turn on the system (see
5. In the remote management console, delete any administrative alerts and close any service tickets.
Replacing Node Memory Modules
This section describes how to remove and replace memory modules in the DXi6900-S Node and contains
the following sections:
Obtaining a Replacement Node Memory Module below
l
Replacing a Node Memory Module below
l
Obtaining a Replacement Node Memory Module
Before beginning the replacement procedure, make sure that you have the required replacement kit. The
appropriate replacement memory module will be provided by Quantum Customer Support (see
below).
You will need the following items to perform this procedure:
Replacement memory module kit provided by Quantum Customer Support.
l
ESD grounding wrist strap (included in the replacement kit)
l
Figure 55: DXi6900-S Node Memory Module
Illustration
Replacing a Node Memory Module
This section describes how to remove and replace a memory module in the DXi6900-S Node.
Caution: Use appropriate ESD precautions, including the use of a grounding strap, when performing
this procedure.
Removing and replacing a memory module in the Node includes the following steps:
Quantum DXi6900-S Field Service Manual
Opening and Closing the Node on page
Turning On the DXi6900-S on page
Description
Replacement memory module (16 GB DIMM)
63).
20).
Figure 55
84
Advertisement
Table of Contents
