Table of Contents
Advertisement
Chapter 1: Basic Operations
DXi6900-S Node
10 GbE optical cable lengths of up to 300
meters with OM3 cables and up to 100
meters with OM2 cables
10 GbE Twinax cable
Figure 2: Node Rear View - DXi6900-S
1
2
6
7
8
9
Table 1: Rear Panel Connectors - DXi6900-S
Item
Indicator, Button, or Connector
1
2 x 12 Gb SAS ports
Quantum DXi6900-S Field Service Manual
3
4
10
11
12
Quantum recommends using the two 10 meter LC to LC
type optical cables that are shipped with the DXi6900-S
system. Consult your 10 GbE optical switch/SFP
documentation for additional information on optical cable
requirements.
Quantum recommends using the approved 5 meter
Twinax cable type that is shipped with the DXi6900-S
system. This cable is compatible with Cisco 5000 Series
Data Center Class switches.
The 10 GbE Copper (Twinax) cable options that Quantum
provides do not support all switches. Please note the
supported switches during the purchase-configuration
process, and if the Twinax cables supplied by Quantum
are not compatible with your switch, then you will need to
provide your own compatible Twinax cables from your
switch vendor. Be sure to have these available before the
system installation takes place.
13
Icon
Description
For connection to Array modules (RBOD)s.
5
14
15
5
Advertisement
Table of Contents
