Application For Updating Software And Firmware (Epson Software Updater) - Epson ET-18100 Series User Manual

Product Information
Running Web Config on a Web Browser
1. Check the printer's IP address.
Hold down the button for at least 5 seconds to print the network status sheet, and then check the printer's
IP address.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Config from the product information screen of the Epson Smart Panel.
Since the printer uses a self-signed certificate when accessing HTTPS, a warning is displayed on the browser
when you start Web Config; this does not indicate a problem and can be safely ignored.
Application for Updating Software and Firmware (Epson Software
Updater)
Epson Software Updater is an application that installs new software, and updates firmware over the Internet. If you
want to check for update information regularly, you can set the interval for checking for updates in Epson Software
Updater's Auto Update Settings.
Note:
Windows Server operating systems are not supported.
Starting on Windows
❏ Windows 11
Click the start button, and then select All apps > EPSON Software > Epson Software Updater.
❏ Windows 10
Click the start button, and then select EPSON Software > Epson Software Updater.
❏ Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
❏ Windows 7/Windows Vista/Windows XP
Click the start button, and then select All Programs (or Programs) > EPSON Software > Epson Software
Updater.
Note:
You can also start Epson Software Updater by clicking the printer icon on the task bar on the desktop, and then selecting
Software Update.
> >
Software Information Application for Updating Software and Firmware (Epson Softwar
149
...