Buttons And Functions - Epson ET-18100 Series User Manual

Guide to the Control Panel

Buttons and Functions

A
Turns the printer on or off.
Unplug the power cord after checking that the power light is off.
B
When a network error occurs, pressing this button cancels the error. Hold this button down for more
than five seconds to perform Wi-Fi auto setup using the WPS push button.
C
Prints a network connection report allowing you to determine the causes of any problems you may
have using the printer on a network. If you need more detailed network settings and connection
status, hold this button down for at least five seconds to print a network status sheet.
D
Stops the current operation.
Hold this button down for five seconds until the
Functions of Button Combinations
Additional functions are available with different combinations of buttons.
+
+
+
+
+
>
Buttons and Functions
PIN Code Setup (WPS)
Hold down the and buttons simultaneously to start PIN Code Setup (WPS).
Wi-Fi Direct (Simple AP) Setup
Hold down the and
Restore Default Network Settings
Turn the printer on while holding down the
When the network settings are restored, the printer turns on and the network status lights flash
alternately.
Print Nozzle Check Pattern
Turn the printer on while holding down the
Disable Network Service
Turn the printer on while holding down the
P
button flashes to run print head cleaning.
buttons simultaneously to start Wi-Fi Direct (Simple AP) Setup.
button to restore the default network settings.
y
button to print the nozzle check pattern.
button to disable Epson Connect settings.
20