Epson ET-18100 Series User Manual page 36

Loading Paper, Discs, and PVC ID Cards
9. When the disc/ID card tray is automatically ejected after printing is complete, pull it out and remove the PVC
ID card.
10. To print the back of the PVC ID card, follow the on-screen instructions and then repeat steps 5 to 9. When you
have finished printing, go to the next step.
11. Wipe the disc/ID card tray with a damp cloth that has been wrung out thoroughly.
12. Insert the disc/ID card tray back into the slot under the output tray.
Important:
c
After printing is finished, make sure you remove the disc/ID card tray. If you do not remove the disc/ID card
tray and turn the printer on or off, or run head cleaning, the tray will strike the print head and may cause the
printer to malfunction.
Related Information
"PVC ID Card Handling Precautions" on page 33
&
"Printing on PVC ID Cards" on page 55
&
> >
Loading PVC ID Cards
36
Loading and Removing PVC ID Card