Advertisement
Quick Links
ET-15000
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
Important Safety Instructions:
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson
product near water.
®
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit until it locks into place and
remove all protective materials from inside the product.
Caution:
Do not touch the flat white cable or the ink tubes and
their translucent cover.
When using telephone equipment, you
2
Fill ink tanks
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution:
This product requires careful handling of ink. If ink spills,
wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
may print fewer pages compared with replacement ink bottles.
1
Make sure that the transportation lock is in the down
position.
2
Open the ink tank cover, then open the cap for the
black ink. Refer to the color-coded sticker to identify the
color of each tank.
3
Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Caution:
Do not shake or squeeze the ink bottles. Do not touch
the top of the ink bottle after its cap is removed.
4
Insert the ink bottle into the filling port.
Note:
Do not force the bottles into position; they are keyed for
each color.
Advertisement
Related Manuals for Epson ET-15000
Summary of Contents for Epson ET-15000
- Page 1 User’s Note: Guide. • Epson cannot guarantee the quality or reliability of third-party ink. Important Safety Instructions: When using telephone equipment, you • Use the ink bottles included with the printer to set up the product.
- Page 2 Wait for the ink to fill the tank. Raise the control panel, then press the power button to Do not squeeze the bottle. turn on the product. Note: Ink flows into the tank and stops automatically when the ink is filled to the upper line.
- Page 3 LINE port on your product. See the online User’s Guide (Canada) for more information. for more information. * May require the Epson Print Enabler or Mopria Print Service app from Select Proceed to set up the fax, or select Set Up Later Google Play™.
- Page 4 General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2019 Epson America, Inc., 9/19...