3. Operation
3.5
Using the Battery
30
Battery level indicator with a residual quantity is shown on the
left side of the Control Panel. When the battery indicator has
one flickering light (level 1), charge the battery immediately.
Refer to the battery levels as shown below.
Level 3
If the battery is not charged for about an hour, the battery
voltage becomes low. At this level, all displays are turned off
except for the error code A.10 as shown in the following
figure, so exposure cannot be performed. After the device is
connected to the battery charger, and the battery level
becomes 'Level 1', all functions are returned to normal
operation.
EzRay Air Portable (Model: VEX-P250) User Manual
Level 2
Level 1