Safety; General Safety Instructions - INOXPA INNOVA F Ex Installation, Service And Maintenance Instructions

1.3. SAFETY

1.3.1. Warning symbols
Danger! Important instructions for protection from explosions

1.4. GENERAL SAFETY INSTRUCTIONS

1.4.1. During installation
The reduce the danger from static electricity, the assembly should be earthed to
ensure electrical continuity between pipes and valves
1.4.2. During operation
The limit values for the operating conditions in explosive atmospheres must not be
exceeded
The valve was selected according to the working conditions specified by the user,
therefore INOXPA is not responsible for any damage that may occur due to the use
of valve under conditions other than those stated in the order
1.4.3. During maintenance
Danger! Important instructions for protection from explosions
An explosive atmosphere may be generated or be present when removing the valve
therefore safe work permits should be set and these tasks should only be carried out
by qualified or trained personnel.
1.4.4. Compliance with the instructions
Failure to comply with the instructions may prove hazardous for operators, the environment, the machine
and the installations, leading to a loss of rights for claiming damages.
This non-compliance may result in the following hazards (in addition to those already listed in the manual):
- Generation of explosive atmospheres and risk of explosion.
1.4.5. Warranty
Any warranty will immediately be declared void, as of right, and we will be entitled to indemnity for any
civil liability claim put forward by third parties (in addition to the conditions referred to in the manual):
_______________________________________________________________________________________________
ED. 2022/11
1. Safety
2
1. SAFETY VALVE of TANK BOTTOM