Advertisement
Quick Links
Owner's Manual
Product Introduction:
The BP1 is an adapter back plate to convert the
Rydeen 10-inch high-definition borderless touch
screen rearview mirror (TOMBO 360, TOMBO
360X, 360 VIEW, SM1 & DC1) from DIY install to a
replacement mirror. Please read this manual for
installation instruction.
Package List:
Backpack Adaptor for Mirror Stem
Mirror Stem VSM-AV
Fit Most Vehicles
Backpack Plate
Screws
L-shaped Tool
D-Tab
for MV Series
Note: Screws size: a (PM2.5*8mm), b (PM3*10mm).
Installation:
Insert Backpack Adaptor for Mirror Stem
onto mirror.
MIC
Use provided VSM-AV mount.
Model No: BP1
Screws size:
PM2.5*8mm
Screws size:
PM3*10mm
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Rydeen BP1
Summary of Contents for Rydeen BP1
- Page 1 Owner’s Manual Model No: BP1 Product Introduction: The BP1 is an adapter back plate to convert the Note: Screws size: a (PM2.5*8mm), b (PM3*10mm). Rydeen 10-inch high-definition borderless touch Installation: screen rearview mirror (TOMBO 360, TOMBO 360X, 360 VIEW, SM1 & DC1) from DIY install to a Insert Backpack Adaptor for Mirror Stem replacement mirror.
- Page 2 This warranty covers all defects in material and workmanship except as specified below. 1. Any products distributed outside of the USA by Rydeen North America, Inc. (Rydeen) or which is not purchased in the USA or Canada unless the product is purchased through the USA Military Exchange Service.
Need help?
Do you have a question about the BP1 and is the answer not in the manual?
Questions and answers