Table of Contents
Advertisement
Quick Links
FROST-FREE REFRIGERATOR/FREEZERS
SPRF34D, CLRF2D, RDF24SS, SPRF6D, SPRF6D7
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
Write Serial Number (on lower left corner of
inside cabinet) here:
_______________________
Serial No.:
Model Nos.
User Manual
Felix Storch, Inc.
An ISO 9001:2015 registered company
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance.com
Advertisement
Table of Contents
Related Manuals for Summit SPRF34D
Summary of Contents for Summit SPRF34D
- Page 1 FROST-FREE REFRIGERATOR/FREEZERS Model Nos. SPRF34D, CLRF2D, RDF24SS, SPRF6D, SPRF6D7 User Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Write Serial Number (on lower left corner of Felix Storch, Inc. inside cabinet) here: An ISO 9001:2015 registered company...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Appliance Safety Important Safeguards Location of Parts Installation Instructions Before Using your Appliance Installation of your Appliance Electrical Connection Extension Cord Anti-tip Bracket Installation Installing the Stainless Steel Handles Full Overlay Panel Installation Instructions Operating your Appliance 9-11 Control Panel for Refrigerator/Freezers 9-10... -
Page 3: Appliance Safety
APPLIANCE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or injure you and others. - Page 4 • In the event of any damage: – Avoid open flames and anything that creates a spark, – Disconnect from the power source, – Air the room in which the appliance is located for several minutes, and – Contact the Service Department for advice. •...
-
Page 5: Location Of Parts
LOCATION OF PARTS... -
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS Before Using your Appliance • Remove the exterior and interior packing. • Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. -
Page 7: Extension Cord
This appliance requires a standard 115/120 Volt AC ~ 60Hz three-prong grounded electrical outlet. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. -
Page 8: Installing The Stainless Steel Handles
Installing the Stainless Steel Handles This appliance includes two stainless steel handles that are not required to operate the unit. To install the handles, follow the instructions below: 1. Remove the door gasket. 2. Install the handle with the screws provided. (DO NOT over-tighten as this will cause damage to the stainless steel door surface.) 3. -
Page 9: Operating Your Appliance
OPERATING YOUR APPLIANCE It is recommended you install the appliance in a place where the ambient temperature is between 44º and 95ºF (7º to 35ºC). If the ambient temperature is above or below the recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extremely cold or hot conditions may cause interior temperatures to fluctuate. -
Page 10: Interior Light
Indicator Light The indicator light is the dot located at the bottom right corner of the display. The indicator light will be on when a multi-key function is selected. To perform a multi-key function, touch and hold the first key, then touch the second key for at least 5 seconds and then release both keys. Child Lock If in 2 minutes or longer without touching any key, the child lock will be activated automatically. -
Page 11: Temporary Memory Function
Temperature Memory Function In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the previous temperature settings, and when power is recovered, the cabinet temperature will return to the same set temperature as before the power went off. Defrosting •... -
Page 12: Care And Maintenance
CARE AND MAINTENANCE Cleaning Your Appliance • Turn off the power, unplug the appliance, and remove all items, including racks and dividers. • Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of baking soda to a quart of water). -
Page 13: Troubleshooting
TROUBLESHOOTING You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. Troubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY • Appliance is not connected to a power •... - Page 14 • The gaskets are dirty. • Clean the drawer gaskets. properly. • The racks or bins are out of position. • Check the racks and bins and refit correctly. • “E0” indicates a communication error • Call for service. for 3 zone models. •...
- Page 15 NOTES...
-
Page 16: Limited Warranty
LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company.