HDS7000, Care and Transport
5.5
General
Warning
Dust and debris
removal
Window Cleaning Procedure
The HDS7000 scanning window must be kept clean. The instructions must be
followed as described in this chapter to clean the scanner mirror.
Direct intrabeam viewing is always hazardous.
Precautions:
Before cleaning windows, ensure the instrument is switched off.
Window Cleaning Kit can be ordered through your local Leica Geosystems dealer.
Using a compressed gas duster (e.g., UltraJet ®2000 Gas Duster or UltraJet®
Compressed CO2 Duster), remove dust and debris from surface of scanner windows.
Never rub off dust or debris as this will scratch the windows and so possibly cause
permanent damage to the special optical coatings.
112