Leica HDS7000 User Manual page 97

Connecting to the
notebook
HDS7000, Scanning
1. Connect the HDS7000 to the notebook with the attached Ethernet cable. The
LAN connection should be automatically activated in the PC otherwise the
attributes of the LAN connection could be shown by choosing network connec-
tions. Set a check mark at Internet Protocol (TCP/IP) and open the attributes. In
attributes the field Source IP address automatically and Source DNS address
automatically should be checked.
2. Settings on the HDS7000:
• Switch on the HDS7000 (press the ON/OFF button for 0.3 sec).
• Go to Main Menu, Settings and enable DHCP Server.
• Reboot the HDS7000.
3. Settings on the notebook:
On the notebook you can access the data on the HDS7000 using the web
browser or an FTP client:
• Enter the IP address of the HDS7000 into your web browser: http://<IP>
or
• Enter the IP address directly at the FTP client.
The scan files on the HDS7000's hard disk are listed in their subfolders in the web
browser/FTP client. When using the web browser a preview of every scan is shown.
You can open the scan files or download them to your notebook.
97