Leica HDS7000 User Manual page 35

HDS7000, Setting Up the Instrument
3. Place the instrument on the tribrach (e) and secure it with the tribrach's locking
knob.
4. Turn on the instrument by pressing the ON/OFF button (f). Go to Level, Laser
Plummet and activate the laser plummet (g).
5. Move the tripod legs (a) and use the tribrach footscrews (h) to centre the
plummet (i) over the ground point.
6. Adjust the tripod legs (j) to level the circular level (k).
7. By using the electronic level (Level) turn the tribrach footscrews (h) to precisely
level the instrument.
8. Centre the instrument precisely over the ground point (i) by shifting the tribrach
on the tripod plate.
9. Repeat steps 7. and 8. until the required accuracy is achieved.
35