Table of Contents
Advertisement
HDS7000, Troubleshooting
HDS7000 battery
charging process
Problem
Problem
Charging status on
charging cradle is not
shown and running
light is active.
Red LED flashing
rapidly on the
charging cradle.
Red LED flashing
slowly on the
charging cradle.
Possible Cause(s)
Internal battery is no
longer charging.
Possible Cause(s)
Battery is depth-discharged
and the charger cannot
initialize.
Battery is defect.
Charging cradle and battery
operated outside the oper-
ation temperature (0°C to
+40°C).
Charging process too slow.
Charger cannot load
battery in given time.
Suggested Remedies
At the end of its life time the
internal battery has lost most
of its capacity. The battery
needs to be replaced.
Suggested Remedies
Turn off power supply and turn
it on again without changing
any configuration.
Test with another battery. If
needed replace defect battery.
Use the charging cradle and the
battery for charging only at
temperature from 0°C to 40°C.
Check with another battery.
106
Advertisement
Table of Contents
