Maintenance; General; Cleaning - INOXPA OVERFLOW Installation, Service And Maintenance Instructions

_____________________________________________________________________________________

6.1. GENERAL

Valves must only be assembled and disassembled by qualified staff, taking into
account that it is necessary to adopt safe-work permits if working in a potentially
explosive atmosphere

6.2. MAINTENANCE

6.2.1. Maintenance of the seals
6.2.2. Storage
6.2.3. Spare parts
When ordering spare valve parts to work in a classified area, the order must explicitly indicate
that the parts will be used in an ATEX area, and must state the characteristics of that area.
Otherwise, INOXPA cannot ensure that the valve operates with parts that are suitable for the
classified area within which it is installed.

6.3. CLEANING

Before starting disassembly and assembly work, the presence or possible formation
of potentially explosive atmospheres must be taken into account
_______________________________________________________________________________________________
ED. 11/2022
6. Maintenance
8
6. MAINTENANCE OVERFLOW VALVE