Start-Up; Starting Up; Operation; Valve Calibration - INOXPA OVERFLOW Installation, Service And Maintenance Instructions

_____________________________________________________________________________________
4.1. VALVE APPLICATIONS

4.2. STARTING UP

The received valve must be checked to ensure that it is adapted to the working
conditions in the classified area and the conditions stated in the order
Ensure that there is electrical continuity between the valve and the installation,
and that the installation has an earth connection

4.3. OPERATION

Do not modify the operating parameters for which the valve has been designed
without written prior authorisation from INOXPA
The valve was selected for specific working conditions in potentially explosive
atmospheres at the time the order was placed. INOXPA will not be responsible for
any damage which may be caused if the information provided by the buyer is
incomplete or incorrect (type of liquid, viscosity, classification of the potentially
explosive zone, gas generated by the potentially explosive atmosphere, etc.)

4.4. VALVE CALIBRATION

_______________________________________________________________________________________________
ED. 11/2022

4. Start-up

7
4. START-UP OVERFLOW VALVE