Titan TTCSP49 Manual page 59

TTCSP49
Problem Possible cause
Engine does Air filter is soiled?
not reach
Incorrect fuel or incorrect
the maximum
mixture?
speed.
Carburetor setting not correct?
Excess Incorrect fuel or incorrect
smoke from mixture?
the engine.
Chain does Chain brake engaged?
not start.
Chain starts Chain brake is not engaged?
up before
Idling speed too high?
throttle trigger
is pressed.
Insufficient The saw chain oil tank empty?
chain
Oiling port clogged?
lubrication/
Incorrect saw chain lubrication
grease.
setting?
Troubleshooting
Solution
Clean the air filter.
Stop the engine, empty tank,
then fill up with the correct
mixture of fuel to oil (40:1).
Have a qualified person adjust
the carburetor.
Stop the engine and empty
tank, then fill up with the correct
mixture of fuel to oil (40:1).
Disengage chain brake.
Engage chain brake.
Press throttle trigger again
slightly after starting.
Fill the saw chain oil tank.
Clean oiling port.
Increase the saw chain
lubrication.
59