Titan TTCSP49 Manual page 46

Care and maintenance
Cleaning the guide bar
> Disassemble the guide bar (2) and saw chain in reversed order from assembly.
> Remove any dirt accumulated inside the guide bar slot using the putty knife (not
provided) (Fig. 39).
> Use a damp, lint-free cloth to clean the surface.
> Wipe the surface with a dry cloth afterwards.
Maintenance table
Inspect and maintain this product regularly based on below maintenance table. Keep
the chain saw in good working condition during maintenance.
Part
Overall
Cylinder
fins
Spark plug
Saw chain
Guide bar
46
39
Task Before/after
each use
check
clean
clean
check
clean
replace
check
lubricate
clean
sharpen
replace
check
lubricate
clean
replace
Every 10 hours
of operation
X
X
whenever necessary
X
X
X
whenever necessary
whenever necessary
X
whenever necessary
Every 25 hours
of operation
X
X
X
TTCSP49
X
X