Titan TTCSP49 Manual page 26

Before you start
4. Unscrew and remove the fuel tank cap (12) (Fig. 14).
5. Fill the fuel and oil mixture into the fuel tank. Leave approximately 5 mm of space
between the top of the fuel and the inside edge of the tank to allow for expansion.
Do not overfill (Fig. 15).
6. Wipe up spilled fuel with a soft cloth. Refit and screw the fuel tank cap (12) firmly
(Fig. 14).
14
12
NOTE: Fuel and oil deteriorate over time. It may be difficult to start the engine
if you use fuel which has been kept for more than 30 days. Towards the end
of the season, it is advisable to put only as much fuel in the tank as you need
for each use, since it should be completely used up before storing the product.
Empty remaining fuel from the tank when storing the product for over 30 days.
26
15
TTCSP49
5 mm