Titan TTCSP40 Manual
  1. Manuals
  2. Brands
  3. Titan Manuals
  4. Chainsaw
  5. TTCSP40
  6. Manual
Titan TTCSP40 Manual

Titan TTCSP40 Manual

Petrol chain saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Petrol Chain Saw
(40.1 cm
)
3
TTCSP40
EAN: 5059340255880
BX220IM/B3
WARNING: Read the instruction handbook thoroughly before
using the product. First time operators should receive practical
use instructions of the product and protective equipment from
an experienced operator.

Advertisement

Table of Contents
loading

Related Manuals for Titan TTCSP40

Summary of Contents for Titan TTCSP40

  • Page 1 Petrol Chain Saw (40.1 cm TTCSP40 EAN: 5059340255880 BX220IM/B3 WARNING: Read the instruction handbook thoroughly before using the product. First time operators should receive practical use instructions of the product and protective equipment from an experienced operator.

  • Page 2: Table Of Contents

    TTCSP40 Let’s get started... These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting Started... Safety information Your product Technical specifications Before start Quick start more detail... Product functions Operation...

  • Page 3: Safety Information

    Safety information TTCSP40 Safety warnings 1. This product is not intended for use by children and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. 2. Children should be supervised to ensure that they do not play with the product.
  • Page 4 Safety information TTCSP40 > Do not under any circumstances modify the product. Modifications can result in serious personal injury or death. > Do not start cutting until you have a clear work area and secure footing. > All product servicing and maintenance, other than the items listed in this manual, should be performed by an authorised service centre.
  • Page 5 Safety information TTCSP40 > Fuel vapour pressure may build up inside the fuel tank depending on the fuel used, weather conditions and the tank venting system. To reduce the risk of burns and other personal injuries, remove the fuel tank cap carefully to allow any pressure build up to release slowly.
  • Page 6 Safety information TTCSP40 Operation > When sawing ensure the product does not touch any foreign materials such as rocks, fences, nails etc. Such objects may be flung out and could result in damage to the product, serious or even fatal injuries.
  • Page 7 Safety information TTCSP40 Transport and storage > Stop the engine and engage the chain brake before transporting the product. > Carry the product with the engine stopped, the guide bar and saw chain to the rear, and the exhaust away from the body.
  • Page 8 Safety information TTCSP40 > Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and chains may cause chain breakage and/or kickback. > Follow the manufacturer’s sharpening and maintenance instructions for the saw chain. Decreasing the depth gauge height can lead to increased kickback.
  • Page 9 Safety information TTCSP40 Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product: >...
  • Page 10 Safety information TTCSP40 Description of signal words: The signal word that indicates a hazard with a high level of risk DANGER! which, if not avoided, will result in death or serious injury. The signal word that indicates a hazard with a medium level of WARNING! risk which, if not avoided, could result in death or serious injury.
  • Page 11 Safety information TTCSP40 Hot surface, do not touch! High temperatures on the product’s surfaces and structural parts that could cause burns, if they are touched. The product can also stay hot for a longer period of time after the operation! Petrol engines produce toxic carbon monoxide exhaust fumes.
  • Page 12 Safety information TTCSP40 Choke – CLOSE position. PULL to close. Primer Objects thrown by the product could hit the operator or other bystanders. Always ensure that other people and pets remain at a safe distance from the product when it is in operation. In general, children must not come near the area where the product is operating.

  • Page 13: Your Product

    Your product TTCSP40 1. Lubrication hole (on both sides) 11. Stop switch 2. Guide bar 12. Oil tank cap 3. Saw chain 13. Fuel tank cap 4. Front hand guard (with chain brake) 14. Adjusting screws for carburetor 5. Front handle (for left hand) 15.

  • Page 14: Technical Specifications

    Your product / Technical specifications TTCSP40 Content of delivery 22. Chain oil flow adjuster 25. Fuel mixing bottle 23. Main unit 26. Guide bar cover 24. Multi-tool 27. File 28. Screwdriver Technical specifications General > Dimensions: approx. 400 x 265 x 270 mm >...
  • Page 15 Technical specifications TTCSP40 > Saw chain gauge: 1.27 mm (0.050") > Saw chain brand / model: OREGON® / 91P057X > Saw chain pitch: 9.525 mm (3/8") > Saw chain speed n 22.86 m/s > Drive sprocket: 6 teeth x 9.525 mm Engine >...

  • Page 16: Before You Start

    Before you start TTCSP40 WARNING! Depending on the actual use of the product the vibration values can differ from the declared total. Adopt proper measures to protect yourself against vibration exposures. Take the whole work process including times the product is running under no load or switched off into consideration!
  • Page 17 Before you start TTCSP40 Assembly WARNING! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and use the pictures provided as a visual guide to assemble the product easily! Disconnect the spark plug connector before assembly! Reconnect it after assembly (see "Maintenance").
  • Page 18 Before you start TTCSP40 1. Pull the front hand guard (4) backwards to disengage the chain brake (Fig. 1). 2. Loosen the fixing nuts (18) using the multi-tool (24) and remove the clutch cover (20) (Fig. 2). Ensure the spiked bumper (16) is properly fixed to the product. Tighten the 2 bolts if necessary.
  • Page 19 Before you start TTCSP40 4. Place the slot on the guide bar (2) over the 2 bolts (step 1, Fig. 3). 5. Push the guide bar (2) to the left towards the drive sprocket (step 2, Fig. 3). 6. Place the saw chain (3) over the drive sprocket and fit around the guide bar (2) (Fig. 4).
  • Page 20 Before you start TTCSP40 8. Refit the clutch cover (20) and fasten using the fixing nuts (18) and the multi-tool (24). To fit the clutch cover, align the tensioner pin with the lower hole on the guide bar (2) by turning the chain tension adjuster (19) clockwise or anti-clockwise with the multi- tool (24) (Fig.
  • Page 21 Before you start TTCSP40 WARNING! Disconnect the spark plug connector before adjusting saw chain tension! The cutting edges of the saw chain are sharp! Always wear protective gloves when handling chain! Always maintain proper chain tension! A loose chain increases the risk of...
  • Page 22 Before you start TTCSP40 Chain lubrication WARNING! The product is not filled with chain oil. It is essential to fill the product with chain oil before using it! Never operate the product without chain oil as this will result in extensive damage to the product! Operating the saw...
  • Page 23 Before you start TTCSP40 NOTE: Always dispose of used saw chain oil and objects contaminated with them in accordance with local regulations. Test run NOTE: Perform the following test before operating your product. This product is equipped with an automatic oiling system! The oiling system automatically delivers the proper amount of oil to the guide bar (2) and saw chain (3).
  • Page 24 Before you start TTCSP40 Filling up fuel and oil WARNING! This product is not supplied with petrol-oil mixture in the engine! Before operating this product it is essential to fill it with petrol-oil mixture! This product is equipped with a 2-stroke engine, the fuel and oil tank are combined and it is essential to fill a fuel-oil mixture before operating this product.
  • Page 25 Before you start TTCSP40 4. Unscrew and remove the fuel tank cap (13) (Fig. 14). 5. Fill the fuel and oil mixture into the fuel tank. Leave approximately 5 mm of space between the top of the fuel and the inside edge of the tank to allow for expansion.

  • Page 26: Quick Start

    Quick start TTCSP40 Operating controls Chain oil flow adjuster Choke knob Front hand guard Recoil starter handle Primer Throttle trigger lock-out Fuel tank cap Oil tank cap Throttle trigger Stop switch...
  • Page 27 Quick start TTCSP40 Preparation Add fuel and oil Assemble Adjust Add chain oil mixture Starting Engage the Set stop switch Fully pull Press primer Pull recoil chain brake to I position choke knob 6 times starter handle 4 times Fully press in...
  • Page 28 For safe use it is essential to read the entire instruction manual before first use! Intended use This petrol chain saw TTCSP40 is designated with a power output of 1.5 kW. The product is intended for cutting logs and limbs with a thickness of max. 37 cm (see “Technical specifications”).

  • Page 29: In More Detail

    Quick start / Product functions TTCSP40 This product must not be used for cutting other materials, such as plastic, stone, metal, wood that contains foreign objects, or materials that are harmful to health. This product should not be used outside of domestic premises e.g. for cutting firewood in forested areas.
  • Page 30 Product functions TTCSP40 Chain brake / front hand guard The front hand guard (4) is a safety mechanism that stops the saw chain (3) immediately when it is pushed towards the operator in case of a kickback. The chain brake is a safety mechanism activated by the front hand guard (4). When kickback occurs, the saw chain stops immediately.

  • Page 31: Operation

    Product functions / Operation TTCSP40 Throttle trigger lock-out The throttle trigger lock-out (8) prevents unintentional activation of the throttle trigger (10). The throttle trigger can only be activated if the throttle trigger lock-out is pressed. Chain catcher The chain catcher (17) is intended to catch a torn saw chain (3) or saw chain which has jumped out of the guide bar (2).
  • Page 32 Operation TTCSP40 Starting the engine DANGER! Risk of fire! > Due to any spilled fuel, the product can catch fire. > Wipe any spilled fuel up before starting. > Start the engine a few metres away from the place where you have filled it.
  • Page 33 Operation TTCSP40 6. Hold the product securely to the ground. Place your left hand on the front handle (5) and additionally secure the product with your right foot (Fig. 22). 7. Pull the recoil starter handle (15) slowly with your right hand until you feel a definite resistance and then give it a brisk, strong pull.
  • Page 34 Operation TTCSP40 4. Hold the product securely to the ground. Place your left hand on the front handle (5) and additionally secure the product with your right foot (Fig. 23). 5. Pull the recoil starter handle (15) briskly and strongly. Repeat until the engine starts.
  • Page 35 Operation TTCSP40 Basic operating / cutting procedure 1. To become proficient attend a recognised chain saw training course to learn how to operate chain saws safely and effectively. Familiarise yourself with all the controls and switches. Practise all movements with the product switched off.
  • Page 36 Operation TTCSP40 8. Do not operate the product with arms fully extended or attempt to saw areas which are difficult to reach, or on a ladder. Never use the product above shoulder height (Fig. 26). 9. Optimum sawing is achieved if the chain speed remains constant during cutting.
  • Page 37 Operation TTCSP40 1. Pinching the saw chain (3) along the bottom of the guide bar (2) may pull the product forward away from the operator (“skating”) (Fig. 28). 2. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back toward the operator (“bouncing”) (Fig.
  • Page 38 Operation TTCSP40 WARNING! Most “kickback” accidents happen during limbing! Pay close attention to the position of the “kickback” zone of the bar when you are “limbing branches that are under tension. Felling a tree 1. When bucking and felling operations are being performed by two or more persons at the same time, the felling operations should be separated from the bucking operation by a distance of at least twice the height of the tree being felled.
  • Page 39 Operation TTCSP40 Felling back cut 1. Make the felling back cut (Fig. 31, A) at least 50 mm higher than the horizontal notching cut (Fig. 31). Keep the felling back cut parallel to the horizontal notching cut. Make the felling back cut so enough wood is left to act as a hinge. The hinge (Fig.
  • Page 40 Operation TTCSP40 Cutting spring poles A spring pole is any log, branch, rooted stump, or sapling which is bent under tension by other wood so that it springs back if the wood holding it is cut or removed. On a fallen tree, a rooted stump has a high potential of springing back to the upright position during the bucking cut to separate the log from the stump.
  • Page 41 Operation TTCSP40 5. Support small logs on a sawing stand or another log while bucking (Fig. 37). 6. If the wood diameter is large enough for you to insert a soft bucking wedge without touching the chain, you should use the wedge to hold the cut open to prevent pinching (Fig.

  • Page 42: Care And Maintenance

    Care and maintenance TTCSP40 The golden rules for care WARNING! Always stop the engine, disconnect the spark plug connector and let the product cool before performing inspection, maintenance and cleaning work. DANGER! Proper maintenance is essential for safe and trouble free operation.
  • Page 43 Care and maintenance TTCSP40 Cleaning the saw chain > Use a soft plastic brush to clean the saw chain (3) from dirt. > Use a resin solvent (not provided) to clean the saw chain. Read the resin solvent manufacturer’s instructions before proceeding.
  • Page 44 Care and maintenance TTCSP40 clean every 10 hours of operation or whenever necessary Nose sprocket lubricate every 10 hours of operation or whenever necessary Clutch lubricate every 25 hours of operation or whenever necessary housing check Chain catcher replace whenever necessary...
  • Page 45 Care and maintenance TTCSP40 Sprocket wheel 1. Clean the sprocket wheel. 2. Using a disposable lube gun, insert the needle nose into the lubrication hole (1) and inject grease until it appears at the outside edge of the sprocket (Fig. 40).
  • Page 46 Care and maintenance TTCSP40 4. Remove any dirt accumulated inside the guide bar (2) slot using the putty knife (not provided) (Fig. 42). 5. Check the guide bar “rail” for wear: Hold a ruler (straight edge) against the side of the guide bar (2) and “cutter side plates”.
  • Page 47 Care and maintenance TTCSP40 2. The height difference between the tooth and the ridge is the cutting depth. When sharpening the saw chain (3) you have to consider the following points (Fig. 44). > File angle > Cutting angle >...
  • Page 48 Care and maintenance TTCSP40 9. Use a depth gauge measuring instrument File position Cutting tip to check the height of Depth gauge the depth gauge. Depth Cutting length setting 1.27 mm Top plate gauge measuring jigs (0.05") are available from most reputable tool merchants (Fig.
  • Page 49 Care and maintenance TTCSP40 Fuel filter Fuel filter The fuel tank of this product is fitted with a filter located at the free end of the fuel pipe. The fuel tank of this product is fitted with a filter located at the free end of the fuel pipe.
  • Page 50 Care and maintenance TTCSP40 4. Check the spark plug for damage and wear. The colour of the electrode should be light-brown. 5. Remove the deposits from the electrode with a soft wired brush. Avoid heavy cleaning of the Spark plug electrode.
  • Page 51 Care and maintenance TTCSP40 Idle speed screw Single D screwdriver WARNING! Adjusting the screws L and H must be performed by an authorised service centre or a similarly qualified person. Using a single D screwdriver (not provided) turn the screws L and H to adjust the quantity of fuel in relation to the air.
  • Page 52 Care and maintenance TTCSP40 Repair This product does not contain any parts that can be repaired by the consumer. Contact an authorised service centre or a similarly qualified specialist to have it checked and repaired. Storage WARNING! Risk of injury! Make sure that unauthorized persons do not have...
  • Page 53 Care and maintenance TTCSP40 Long term storage NOTE: Risk of product damage! > If you are not going to be using the product for a while, remove the fuel and saw chain oil from the product. This way, you will prevent a gumming-up of the engine and of the grease pump.

  • Page 54: Troubleshooting

    Troubleshooting TTCSP40 Troubleshooting Suspected malfunctions are often due to causes that the operators can fix themselves. Therefore check the product using this section. In most cases, the problem can be solved quickly. WARNING! Only perform the steps described in these instructions! All further...
  • Page 55 Troubleshooting TTCSP40 Problem Possible cause Solution Engine does Air filter is soiled? Clean the air filter. not reach Spark plug is soiled (tip is Clean spark plug. the maximum rusted)? speed. Incorrect fuel or incorrect Stop the engine and empty...

  • Page 56: Recycling And Disposal

    Recycling and disposal / Guarantee TTCSP40 Recycling and disposal 1. Old equipments are potentially recyclable and do not, therefore, belong in your household rubbish. You are requested to assist us and our contribution to saving resources and protecting the environment by handing in this equipment to an equipped collection centre (if there is one available).

  • Page 57: Customer Care And Technical Helpline

    Customer care and technical helpline TTCSP40 Customer care and technical helpline A better way to repair your tools Kingfisher takes special care in creating high-quality garden power tools that are designed to last. But if a fault develops with your garden power tool and you need to claim under...

  • Page 58: Availability Of Spare Parts

    Availability of spare parts TTCSP40 Availability of spare parts Contact the customer service helpline for assistance or visit www.kingfisherspares.com For assistance contact the customer services helpline: UK: 0800 0789647 uk@Kingfisherservice.com EIRE: 1800 932226 eire@kingfisherservice.com Further information about this product can also be found at:...

  • Page 59: Declaration Of Conformity

    UK declaration of conformity TTCSP40 (UK) DECLARATION OF CONFORMITY Product > Chain saw > TTCSP40 > 40.1 cm , 1.5 kW > 000001 - 999999 Name and address of the manufacturer or his authorised representative: Kingfisher International Products Limited 3 Sheldon Square...

  • Page 60: Ec Declaration Of Conformity

    EC declaration of conformity TTCSP40 (EN) EU DECLARATION OF CONFORMITY (FR) DÉCLARATION UE DE CONFORMITÉ (PL) DEKLARACJA ZGODNOŚCI UE (RO) DECLARAȚIA DE CONFORMITATE UE (ES) DECLARACIÓN UE DE CONFORMIDAD (PT) DECLARAÇÃO DE CONFORMIDADE UE Product/ Produit/ Produkt/Produsul/Producto/Produto > Chain saw/Tronçonneuse/Pilarka łancuchowa/Motoferastrau/Motosierra/Motosserra >...
  • Page 61 EC declaration of conformity TTCSP40 The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: L’objet de la déclaration décrit ci-dessus est conforme à la législation d’harmonisation de l’Union applicable: Wymieniony powyżej przedmiot niniejszej deklaracji jest zgodny z odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego: Obiectul declarației descris mai sus este în conformitate cu legislația relevantă...
  • Page 62 EC declaration of conformity TTCSP40 Measured Sound Power Level/ Niveau de puissance acoustique mesuré/ Zmierzony poziom mocy akustycznej/ Nivel de putere acustică măsurat/ Nivel de potencia sonora medido / Nível de potência sonora medido: 112.2 dB(A) Guaranteed Sound Power Level/ Niveau de puissance acoustique garanti/ Gwarantowany poziom mocy akustycznej/ Nivel de putere acustică...
  • Page 63 Manufacturer, Fabricant, Prodecent, Producător, Fabricante: UK Manufacturer: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.diy.com www.screwfix.com www.screwfix.ie To view instruction manuals online, visit www.kingfisher.com/products...

This manual is also suitable for:

5059340255880

Table of Contents