Titan TTCSP49 Manual page 52

Care and maintenance
Air filter
Inspect the air filter (6b) regularly. Clean or replace it with a new one if necessary.
1. Loosen the fixing screw and remove the top cover (6) (Fig. 47).
2. Remove the air filter (6b).
3. Using the screwdriver (28) separate the air filter (6b) into its two parts and tap them
on a stable surface to remove dust. Use compressed air (max. 3 bar) to remove
stubborn dust.
4. Reassemble the two filter parts and refit the air filter (6b).
5. Attach the top cover (6) and secure it with the fixing screw.
NOTE: Ensure the rubber seal between the carburettor and the air filter (6b)
is clean and tightly fits in place.
47
Fuel filter Fuel filter
The fuel tank of this product is fitted with a filter located at the free end of the fuel pipe. The fuel tank of this product is fitted with a filter located at the free end of the fuel pipe.
If it be necessary to clean or replace the fuel filter, contact an authorised service centre If it be necessary to clean or replace the fuel filter, contact an authorised service centre
or a similarly qualified person. or a similarly qualified person.
52
1
6
2
TTCSP49
6b