Troubleshooting - Titan TTCSP49 Manual

Troubleshooting

Troubleshooting
Suspected malfunctions are often due to causes that the operators can fix themselves.
Therefore check the product using this section. In most cases, the problem can be
solved quickly.
WARNING! Only perform the steps described in these instructions! All further
inspection, maintenance and repair work must be performed by an authorised
service centre or a similarly qualified specialist if you cannot solve the problem
yourself!
Problem
Engine does
not start
58
Possible cause
Tank empty?
Incorrect starting procedure?
Spark plug connector not firmly
attached?
Spark plug connector is dirty?
Excess fuel in the combustion
chamber?
Spark plug is soiled (tip is
rusted)?
Primer has been pressed at cold
start?
Gap between electrodes is too
large?
Incorrect fuel or incorrect
mixture?
Solution
Fill the fuel tank.
Follow the engine starting
procedure.
Attach the spark plug connector
firmly.
Clean the spark plug connector.
Pull the choke knob and start
engine several times.
If the engine does not start:
remove spark plug and dry off
electrode.
Clean spark plug.
Press the primer 6 times. Follow
the engine starting procedure.
Set gap between electrodes
between 0.6-0.7 mm.
Stop the engine, empty tank,
then fill up with the correct
mixture of fuel to oil (40:1).
TTCSP49